Craft of Frame Building

Braze-On vs. Welded: Choosing Your Construction Method

Lugged, fillet-brazed, or TIG-welded? Each construction method has its own character, strengths, and learning curve. Here's how to choose.

5 min readJune 22, 2026

Three Paths to a Frame

Every steel frame is joined one of three ways: lugged brazing, fillet brazing, or TIG welding. Each produces a sound, beautiful frame — but they differ in aesthetic, technique, and the skills required.

Lugged Brazing

The most traditional method. Lugs are cast metal sleeves that fit over the tube junctions. The builder applies flux, heats the joint, and draws molten silver or brass filler into the joint via capillary action.

Pros: Elegant, classic aesthetic. Forgiving of minor alignment errors. No visible weld beads.

Cons: Limited geometry flexibility (lug angles constrain design). Requires a specific lug inventory.

Fillet Brazing

The builder builds up a smooth fillet of brass filler at each tube junction, then files it to a sculptural, seamless transition. No lugs needed — tubes are mitered directly to each other.

Pros: Unlimited geometry freedom. Beautiful, flowing joints. No lugs to source.

Cons: Requires excellent torch control and file work. Time-consuming finishing.

TIG Welding

An electric arc fuses the tubes directly, with a filler rod adding material where needed. The result is a small, tidy weld bead at each junction.

Pros: Fast, clean, and versatile. Works well with thin-wall tubing. Popular for stainless and titanium.

Cons: Demands precise fit-up. Heat management is critical. Less forgiving of gaps.

Which Should You Choose?

There's no wrong answer — only the method that fits your aesthetic vision, your patience, and your hands. Many builders master all three over time. Start with the one that excites you most, and let the others follow.

Was this article helpful?

Get new articles + build slot alerts in your inbox

No spam. Just craft, community, and the story behind the frame.

Join the Conversation

Share your thoughts, ask questions, and connect with other builders and riders in the VeloVelo community.