Building Your First Frame Jig: What Actually Matters
A frame jig is the most important investment you'll make. Here's what to look for — and what to ignore — when choosing or building your first one.
The Heart of Your Shop
Your frame jig holds the tubing in precise alignment while you braze or weld. It is, quite literally, the foundation of every frame you build.
What Actually Matters
Rigidity. The jig must not flex or shift during the build process. A jig that moves even 1mm can throw your alignment off enough to ruin a frame.
Adjustability. You'll build frames of different sizes and geometries. A jig that requires hours of reconfiguration between builds will cost you dearly in productivity.
Precision of adjustment. Being able to adjust is not enough — you need to adjust precisely. Look for fine-thread screws, graduated scales, and repeatable detents.
What Doesn't Matter (As Much)
Brand prestige. A well-built homemade jig can produce frames as straight as a $5,000 name-brand jig.
Material. Aluminum jigs are lighter and don't rust. Steel jigs are heavier and more rigid. Both work.
Number of axes. More adjustment axes sounds better, but most builders use the same few configurations 90% of the time.
Buying Used
A used jig from a retiring builder is often the best value you'll find. Look for:
- Smooth-moving slides (no binding or slop)
- Undamaged threaded components
- Complete documentation or fixtures
A jig that's been well-maintained for 20 years will serve you better than a brand-new budget jig.
Was this article helpful?
Get new articles + build slot alerts in your inbox
No spam. Just craft, community, and the story behind the frame.